Permanent Aqueous Mounting Medium BUF058A BIO-RAD ,Permanent Aqueous Mounting Medium-试剂- bio-rad伯乐一级代理 |伯乐Aminex |伯乐电泳槽1658001| 伯乐ddPCR bio-rad授权代理商、biorad伯乐qpcr仪

Permanent Aqueous Mounting Medium BUF058A BIO-RAD ,Permanent Aqueous Mounting Medium

2024-10-22

Permanent Aqueous Mounting Medium

货号：BUF058A,BUF058B,BUF058C

规格：30 ml,100 ml,250 ml

价格：1683,3485,6503

产品类型：辅助试剂

品牌：Bio-Rad

物种：其它

宿主：其它

抗体亚型：其它

荧光染料：其它

产品详情
Preservative Stabilisers	Pack Size: 30 ml0.09% Sodium Azide (NaN3)Pack Size: 100 ml, 250 ml0.09% Sodium Azide (NaN3)
Regulatory	For research purposes only
Guarantee	Guaranteed until date of expiry. Please see product label.
存储条件
Store at room temperature (+25oC). For long term storage recommend 2-8oC. DO NOT FREEZE.
应用
Application Name	Verified	Min Dilution	Max Dilution
Immunohistology - Frozen
Immunohistology - Paraffin	√		Neat
Instructions For Use Ensure product is at room temperature before use.Do not use non-polar solvent on samples prior to applying this medium.1. Rinse slide for mounting with distilled or deionized water, touch-dry slide edges on paper towel and place slide on flat surface.2. Invert vial and open dropper to remove air bubbles.3. Apply 3-4 drops of mounting medium directly onto specimen and tilt slide back and forth to distribute evenly. A plastic pipette tip may also be used for spreading, taking care not to damage specimen. Remove excess medium by touching slide edges on paper towel.4. Leave slide to stand for 1-2 hours at room temperature (25oC). Alternatively slide can be heated for 40-60 minutes at 37-40oC.Mounted slide can now be visualized under a microscope:1. For oil immersion lens, the oil can be dropped directly onto the mounted specimen, once the mounting medium has dried. A coverslip is not required. The oil can be later removed by wiping with Kim wipes.OR2. For oil immersion lens, apply 1-2 drops of preferred organic mounting medium on top of dried mounted specimen and cover with coverslip.To remove coverslip or mounting medium, soak the slide for 5-10 minutes in warm water (37oC) until medium is dissolved. Give slide final rinse in warm water. Remount if required. Ensure product is at room temperature before use.Do not use non-polar solvent on samples prior to applying this medium.1. Rinse slide for mounting with distilled or deionized water, touch-dry slide edges on paper towel and place slide on flat surface.2. Invert vial and open dropper to remove air bubbles.3. Apply 3-4 drops of mounting medium directly onto specimen and tilt slide back and forth to distribute evenly. A plastic pipette tip may also be used for spreading, taking care not to damage specimen. Remove excess medium by touching slide edges on paper towel.4. Leave slide to stand for 1-2 hours at room temperature (25oC). Alternatively slide can be heated for 40-60 minutes at 37-40oC.Mounted slide can now be visualized under a microscope:1. For oil immersion lens, the oil can be dropped directly onto the mounted specimen, once the mounting medium has dried. A coverslip is not required. The oil can be later removed by wiping with Kim wipes.OR2. For oil immersion lens, apply 1-2 drops of preferred organic mounting medium on top of dried mounted specimen and cover with coverslip.To remove coverslip or mounting medium, soak the slide for 5-10 minutes in warm water (37oC) until medium is dissolved. Give slide final rinse in warm water. Remount if required. Ensure product is at room temperature before use.Do not use non-polar solvent on samples prior to applying this medium.1. Rinse slide for mounting with distilled or deionized water, touch-dry slide edges on paper towel and place slide on flat surface.2. Invert vial and open dropper to remove air bubbles.3. Apply 3-4 drops of mounting medium directly onto specimen and tilt slide back and forth to distribute evenly. A plastic pipette tip may also be used for spreading, taking care not to damage specimen. Remove excess medium by touching slide edges on paper towel.4. Leave slide to stand for 1-2 hours at room temperature (25oC). Alternatively slide can be heated for 40-60 minutes at 37-40oC.Mounted slide can now be visualized under a microscope:1. For oil immersion lens, the oil can be dropped directly onto the mounted specimen, once the mounting medium has dried. A coverslip is not required. The oil can be later removed by wiping with Kim wipes.OR2. For oil immersion lens, apply 1-2 drops of preferred organic mounting medium on top of dried mounted specimen and cover with coverslip.To remove coverslip or mounting medium, soak the slide for 5-10 minutes in warm water (37oC) until medium is dissolved. Give slide final rinse in warm water. Remount if required.

技术参数

产品应用 IHC

产品类型 Accessory Reagent

推荐用于 IHC

© bio-rad伯乐一级代理 |伯乐Aminex |伯乐电泳槽1658001| 伯乐ddPCR bio-rad授权代理商、biorad伯乐qpcr仪是专业的授权总代理区域代理经销平台。
© 如需询价，请加客服QQ：1749072012 、客服微信：jinshanbio，或发送邮件到1749072012@qq.com
© 平台为生命科学研究相关领域提供一站式耗材试剂仪器解决方案和采购服务，数据资源基于CC协议。
© 本文地址：https://gibcohyclone.cn/thread-41649.htm

特别声明：以上内容(如有图片亦包括在内)来源于授权厂家或网络，如有侵权，请联系删除，本平台不提供信息存储服务。

Notice: The content above (including the pictures if any)comes from authorized manufacturers or networks. In case of infringement, please contact to delete it. This platform does not provide information storage services.

产品询价需求提交

Permanent Aqueous Mounting Medium BUF058A BIO-RAD ,Permanent Aqueous Mounting Medium

相关推荐