Thermo 10006D,Dynabeads™ Protein A Immunoprecipitation Kit/Dynabeads™蛋白A免疫沉淀试剂盒

2024-10-24

Dynabeads™ Protein A Immunoprecipitation Kit/Dynabeads™蛋白A免疫沉淀试剂盒

货号:10006D

规格:40 reactions

价格:5368

产品类型:蛋白提取/纯化

品牌:Thermo Fisher

The Dynabeads™ Protein A Immunoprecipitation Kit is a faster and easier solution for immunoprecipitation (IP) than using Sepharose™ resin or agarose resin, and includes all reagents and buffers required to perform IP using your own antibody. The kit is optimized for standard IP, but can also be used for Co-IP, chromatin IP (ChIP), or RNA IP (RIP). The kit includes the widely used Dynabeads Protein A with recombinant Protein A (~45 kDa) covalently coupled to the magnetic bead surface. Both manual and automated protocols are available.Manual Dynabeads separation is fast and easy to performThe manual protocol is simple and can be performed in under 40 minutes. First, the antibody for the target protein is incubated with the Dynabeads Protein A in a tube for 10 minutes. Excess antibody is washed away by placing the tube in a DynaMag™ magnet and removing the supernatant. The antibody-coated beads can then be used for a variety of downstream applications including IP, Co-IP, chromatin IP (ChIP), RNA IP (RIP), small-scale IgG purification, and protein purification. Bound material is easily collected using a DynaMag magnet due to the unique magnetic properties of the Dynabeads. The recombinant protein A on the beads contains no albumin binding sites, thus albumin is not co-purified during the procedure. The IP is fast and gives high yield, high reproducibility, and very little non-specific binding, thus pre-clearing is not required.Automated Dynabeads separation helps increase throughput and reduces hands-on timeIf you are working with several samples in parallel, the number of washing steps and the hands-on time increases proportionally with the number of samples. Pipetting and other manual handling tend to be less consistent than automation when working with many samples at a time. To better handle a medium- to high-throughput number of samples, reduce hands-on time, and secure high reproducibility, we have developed IP protocols for the KingFisher Flex and KingFisher Duo Prime instruments. The automated protocols replicate the manual protocols, obtaining equally high target protein yield and the same low non-specific binding and high reproducibility. It doesn’t matter if you are working with 10 or 96 samples, the IP protocol is less than 40 minutes regardless. Just load the reagents on the plates, push the “Start” button and by the time you have prepared for downstream analysis, the IP is done. Some optimization (e.g., incubation times) might be necessary depending on your antibody and the abundance and/or specificity of your target protein.Gentle separation causes minimal physical stress to proteinsThe magnetic separation technology utilized by Dynabeads Protein A is rapid and gentle, causing minimal physical stress to your target proteins. This permits the isolation and concentration of labile composites that might otherwise dissociate or be damaged by proteases during long incubation times. Native protein conformation and large protein complexes are preserved.Binding strength and capacityDynabeads Protein A allow for isolation of most mammalian immunoglobulins (Ig). The amount of Ig captured depends on the concentration of Ig in the starting sample and on the type and source of the Ig. 100 µL of Dynabeads Protein A will isolate approximately 25–30 µg human IgG from a sample containing 20–200 µg IgG/mL. Predominant Fc-binding allows optimal Ig orientation. The antibodies bind to the outer smooth surface of the beads, thus are not trapped in large pores as with Sepharose/agarose-based beads. All antibodies are available for protein binding, so low amounts of antibody are required while still obtaining the same high yield of target protein. The smooth bead surface is also responsible for the low non-specific binding that Dynabeads are known for.

优点和特点:
• IP in less than 40 minutes• High target protein yield with low antibody consumption• Very low non-specific binding with high signal-to-noise ratio• No columns, centrifugations, or time-consuming pre-clearing required• High reproducibility with Dynabeads Protein A and all buffers supplied in the kit• High throughput compatible with KingFisher™ instruments
数据:

Compare consistency of IP results for multiple users

Comparison of results for all methods vs. Dynabeads® Protein G

Immunoprecipitation Reproducibility and Yield Comparison

技术参数
© bio-rad伯乐一级代理 |伯乐Aminex |伯乐电泳槽1658001| 伯乐ddPCR bio-rad授权代理商、biorad伯乐qpcr仪是专业的授权总代理区域代理经销平台。
© 如需询价,请加客服QQ:1749072012 、客服微信:jinshanbio,或发送邮件到1749072012@qq.com
© 平台为生命科学研究相关领域提供一站式耗材试剂仪器解决方案和采购服务,数据资源基于CC协议。
© 本文地址:https://gibcohyclone.cn/thread-48644.htm
产品询价需求提交
返回
扫码添加客服微信,咨询产品报价